Recent Activity

Adil replied to the thread Speedmaster 102-- 8 units.

I think that the problem is on the variant code , please check the original variant code

Adil replied to the thread Speedmaster 102-- 8 units.

Normlly if rhey dont do a good test it will give an error code

Miguel A. Oliveras posted a new thread.

Now Loading SPF-20A

Hello, can someone help me with the Horizon SPF-20A machine. It is not initialized. And on its screen it shows the message "Now Loading"...

Forum: Collator-Booklet Maker Systems

Miguel A. Oliveras replied to the thread Horizon SPF-20A "Now Loading".

Greetings Gabriel, I have the same problem. Did you solve it?

Jack liston replied to the thread pan roller setting.

Yes same problem on CD uv if you have an Air curtain on your press this might help open Air on ds .if you can check that meter roller...

Beguin replied to the thread Speedmaster 102-- 8 units.

Hi dear, I would like to know, when you turn on the machine, do the register motors do a test? Does the phenomenon occur on the eight...

Adil replied to the thread SM52 Perfecting changeover error, Monitoring of reversing drum - storage drum synchronization.

Please you told me that you have only p21 error code but if you have also p02 you have to check if clamping mechanism do not close (...

Adil replied to the thread SM52 Perfecting changeover error, Monitoring of reversing drum - storage drum synchronization.

The meaning of p21 error code can be mechanical also boot problem . Compare the entires on the vatiant code with the supplied printout...

junker1984 replied to the thread DDS dampening GTO 52.

The DDS system utilized a number of parts used in the conventional system, though roller configuration was changed significantly. I was...

Sunilvaryani replied to the thread DDS dampening GTO 52.

Ok sir What about the dds dampening system Thanks Sunil

junker1984 replied to the thread DDS dampening GTO 52.

Kompac is a great alternative to the old conventional dampening systems on GTO presses, chemistry requirements are similar to that used...

Ahmed Mahrous replied to the thread Speedmaster 102-- 8 units.

Thank you mr/ashok kumar for your reply but all other motors like diagonal or margin working correctly from cptronic.

Cdel posted a new thread.

pan roller setting

Hi everyone, looking for some assistance. When setting pan roller. I go to where the water bead disappears and the 1/2 turn tighter on...

Forum: Heidelberg Printing Presses