Recent Activity

Sunilvaryani replied to the thread DDS dampening GTO 52.

Hello Sir Is a kompac varn damper system ok for a gto press I’m consider to buy one Do it also use alcohol and what are the chemicals...

Ahmed Mahrous posted a new thread.

Speedmaster 102-- 8 units

hello everybody i have a problem with adjustment of printing pressure. the motors are not flashing on cptronic but i can't increase or...

Forum: Heidelberg Printing Presses

jmartin560 replied to the thread OKI 900DP Envelope Printer Timing Out.

Fortune awaits you! Participate in the giveaway!

Sunilvaryani replied to the thread SM52 Perfecting changeover error, Monitoring of reversing drum - storage drum synchronization.

Dear sir I think my press pm 52 is having the same problem I got error p 21 The machine don’t move , manually it’s on straight...

digiMart has a new avatar.

Tihomir Vidic posted a new thread.

Duplo DBM 500 - stitcher unit does not return to the home position

Hello, does anyone have experince with error E72 on Duplo DBM-500 machine!? As you can see on photo, our machine makes 2-3 pieces...

Forum: Collator-Booklet Maker Systems

Adil replied to the thread Polar 115E, Memory Bank Fault (Error 240).

Good kob

Karthik.k attached a file to the thread Polar 115 problem.

Hello all I am facing REAR TABLE PROTECTION ERROR for my POLAR MOHR N115 PLUS can any one help in this

Karthik.k replied to the thread Polar 115E, Memory Bank Fault (Error 240).

Yes sir I did and now the that problem is ok

sriranjith posted a new thread.

Heidelberg Speed master 102VP for S...A...L...E

1991 Heidelberg Speed Master 102 VP: 4 colors, Maximum size: 28 X 40, Alcolor Damps, CPC 1.03, Cptronics, Perfector 2/2, Coater....

Forum: Offset & Digital Presses for sale

Adil replied to the thread Alcohol reading on console screen.

Hi , which filter did you clean and what type of alcohol reading do you have ?? Please explain more

er.bajaj001@gmail.com replied to the thread Wohlenberg Cut tec115 knife doesn’t cycle.

Open Fly wheel Cover see if you can see Spark while Knief is Activated. if yes time to Change/Adjust the Carbons. If no Check the Gap in...

CHOCK replied to the thread Wholenberg 185 cut tech.

Hi sir: You must do it , by proof and error, the fact is to due is older machine, And not always work as the factory say, in my Long...